Dry type Transformer Cooling Fan refers to the device used for transformer cooling. It is designed and produced in strict accordance with JB/T8971-1999 Cross flow Cooling Fans for Dry type Transformers. The iron core of motor stator and rotor is made of high-quality cold-rolled silicon steel sheet; Low noise bearing; The impeller adopts aluminum alloy surface electrophoresis treatment, and then fine dynamic balance adjustment; The left and right end plates are made of stainless steel by stamping, and the air inlet plate, air outlet plate and air guide plate are made of aluminum alloy profiles by buckle combination; The whole fan has reasonable structure, beautiful appearance, large air volume, low noise, low temperature rise, long service life, stable operation, convenient installation, etc.
working principle
When the cooling fan is used for the dry-type transformer, it is placed on both sides of the lower part of the transformer coil to blow the cold air directly into the high and low voltage cooling air ducts of the transformer coil, with obvious heat dissipation effect, which can ensure the normal operation of the transformer and extend its service life. (The functions such as cooling fans startup and shutdown, transformer overtemperature alarm and overtemperature trip are provided by temperature control device).
Model description
For example, the fan model is GFDD470-120A, which means that the working voltage is single-phase 220V, the total length of the fan is 470mm, and the impeller diameter is 120mm. The top blowing dry-type transformer with the motor installed on the right side uses the Cross Flow Cooling Fan.
Cooling mode
The cooling mode of dry-type transformer is divided into natural air cooling (AN) and forced air cooling (AF). In case of natural air cooling, the transformer can operate continuously for a long time under rated capacity. In case of forced air cooling, the output capacity of transformer can be increased by 50%. It is applicable to intermittent overload operation or emergency overload operation; Due to the large increase of load loss and impedance voltage during overload, it is in a non economic operation state, so it should not be in a long-term continuous overload operation.
FAQ
1. Are you a trading company or a manufacturer?
We are a company integrating production and marketing, industry and trade!
2. What kind of grounding material do you produce?
3. Are customized materials available?
Yes, please provide the specifications you need.
4. Do you accept OEM services?
yes!
5. What is your delivery time?
Usually 20-25 days, please confirm with us before ordering!
6. What is payment Trems?
Generally, 50% is the deposit and 50% is before the bill of lading is sent by wire transfer.
7. How to package the product?
Usually, in a steel tray. We will do it according to customers' requirements.
8. What is the loading port available to you?
Usually Ningbo Port or Shanghai Port.